Server Management - Remote Server Management
1747988 Members
4748 Online
108756 Solutions
New Discussion юеВ

Re: Video through ILO is distorted badly

 
Graham Clifford
Occasional Contributor

Video through ILO is distorted badly

We are having video issues on two BL460C G5's in a c7000 enclosure. Other BL460C G5's are fine.

When we ILO in to these machines (Java or ActiveX) the video is badly distorted (see attached file).

We have tried multiple clients, and we have tried removing and reinserting the physical machines. We have also tried upgrading to the latest ILO firmware and the latest OA firmware on the chasis.

Nothing helps.

Any ideas?

Thanks

G
5 REPLIES 5
Graham Clifford
Occasional Contributor

Re: Video through ILO is distorted badly

I should note that we have also shutdown the machines and watched them from boot, the video never clears up.
Oscar A. Perez
Honored Contributor

Re: Video through ILO is distorted badly

Have you tried connecting a monitor on that blade via the SUVI cable in order to check if you are getting the same distorted video?



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Graham Clifford
Occasional Contributor

Re: Video through ILO is distorted badly

Not yet. The server is located in another part of the world!
Berni_Alvarez
Visitor

Re: Video through ILO is distorted badly

I have the same problem in 4 BL460 G5. I have tried connecting a monitor on the blades via the SUVI and i am getting the same distorted video.

Oscar A. Perez
Honored Contributor

Re: Video through ILO is distorted badly

If the video remains distorded even after connecting a monitor to the blade via the SUVI cable then it is clear that this is a hardware problem and you are going to need a system board replacement.




__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!