HPE Community
Server Management - Remote Server Management
1752806 Members
5730 Online
108789 Solutions
New Discussion

configuring ILO to dynamically update DNS

 
DamianN
Occasional Contributor

‎08-02-2005 08:54 PM

‎08-02-2005 08:54 PM

configuring ILO to dynamically update DNS

Hi,
how can I configure the ILO/RILOE II to update the Active Directory DNS dynamically (unsecure is allowed)
Thx and best regards
0 Kudos
Reply
1 REPLY 1
acartes
Honored Contributor

‎08-03-2005 08:22 AM

‎08-03-2005 08:22 AM

Re: configuring ILO to dynamically update DNS

There is a configuration option on the Network Settings page, "Register With DDNS Server". Set this to YES. This is the default behavior for this setting.

Of course, it requires a DNS server and/or WINS server. Those can also be specified on the Network Settings page. However, if you use DHCP, the DHCP server can respond with the DNS/WINS addresses and automate this.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.