Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

configuring ILO to dynamically update DNS

DamianN
Occasional Contributor

configuring ILO to dynamically update DNS

Hi,
how can I configure the ILO/RILOE II to update the Active Directory DNS dynamically (unsecure is allowed)
Thx and best regards
1 REPLY
acartes
Honored Contributor

Re: configuring ILO to dynamically update DNS

There is a configuration option on the Network Settings page, "Register With DDNS Server". Set this to YES. This is the default behavior for this setting.

Of course, it requires a DNS server and/or WINS server. Those can also be specified on the Network Settings page. However, if you use DHCP, the DHCP server can respond with the DNS/WINS addresses and automate this.