Server Management - Remote Server Management
1748092 Members
5901 Online
108758 Solutions
New Discussion

Re: cpqlocfg error

 
Karl Sarkozi
New Member

cpqlocfg error

I am getting the following error when I try to change some network settings:

IP Address is:
cpqlocfg: ERROR: SSL_write:Connection Terminated:reason(0).

Is it necessary to have a network connection to the RIB itself to do this? I was able yo update the firmware using the XML script, but I specified the IP address of the server, not the name or IP address of the RIB itself. I had a network connection to the RIB on that occasion.
1 REPLY 1
barnett chan
Trusted Contributor

Re: cpqlocfg error

Cpqlocfg utility should use the iP or DNS name of the Lights Out device (RILOE/iLO), and not the ip of the server.