Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

download RILOE-II Driver to version 3.2.1.0

AUDREY_11
Occasional Contributor

download RILOE-II Driver to version 3.2.1.0


I am getting the following error HPSReports:

=======================

HPONCFG RILOE-II/iLO setup and configuration utility
Version 1.1 (c) Hewlett-Packard Company, 2004

ERROR : HPONCFG could not retrieve RILOE-II device information
HPONCFG RILOE-II/iLO setup and configuration utility

Version 1.1 (c) Hewlett-Packard Company, 2004
Current RILOE-II Driver Version =

ERROR: HPONCFG supports RILOE-II driver version 3.2.1.0 or Greater.

ACTION REQUIRED: Please Update the RILOE-II Driver to version 3.2.1.0 or greater

=======================



Where can i download this driver? i've been looking everywhere.

The HP page says "Not available"

Thanks
Audrey :)
3 REPLIES
WFHC-WI
Honored Contributor

Re: download RILOE-II Driver to version 3.2.1.0

Hi Audrey,

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=264858&taskId=135&prodTypeId=329290&prodSeriesId=397204〈=en&cc=us

This is the main page for RILOE II board downloads. Which OS are you using?
AUDREY_11
Occasional Contributor

Re: download RILOE-II Driver to version 3.2.1.0

Thanks WHI...

Your an angel :)

It's Win 2000, Can you tell me if the instalation requires a reboot or can i apply it during production time


Audrey
WFHC-WI
Honored Contributor

Re: download RILOE-II Driver to version 3.2.1.0

I would recommend scheduling the update for your next available downtime.

I have not applied this particular package before but typically Lights Out updates do not require a reboot. As with nearly any newer update from HP, you can select at the end of installing whether to reboot immediately. Still, I think the best practice is to reboot as soon as possible after applying the update.

Good luck!