Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO 3: Change Remote Console Port using cpqlocfg not working

Jimmy Tn
Occasional Advisor

iLO 3: Change Remote Console Port using cpqlocfg not working

I'm unable to change "Remote Console Port" on an iLO 3 by using the cpqlocfg.exe utility.
It works on iLO and iLO 2 and I'm using the command as outlined in the newest .xml example files (which include iLO 3).
I can also change the port manually in the web interface.

Any ideas?
7 REPLIES
Jan Soska
Honored Contributor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

latest driver and utility used?

Jan
Jimmy Tn
Occasional Advisor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

Hi Jan,

I think so. Firmware v 1.05 and utility v 3.00.

BR Jimmy
Jan Soska
Honored Contributor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

Hello,
that your problem.
ILO3 is sopported with HP Lights-Out Online Configuration Utility v3.1 from May2010...
Check: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=4154847&prodTypeId=18964&prodSeriesId=4154735&swLang=13&taskId=135&swEnvOID=1005


Jan
Jan Soska
Honored Contributor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

ahh, better link for all OS is: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4154847〈=en&cc=us&taskId=135&prodSeriesId=4154735&prodTypeId=18964

Jan
Jimmy Tn
Occasional Advisor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

I think you misunderstand the utility in question. The utility that is used to configure iLO with the help of xml files is NOT HP Lights-Out Online Configuration Utility. It's HP Lights-Out Configuration Utility further down in the list of iLO 3 software. The first one is a GUI app run from the server itself while the one I mean is used to remote configure the iLO using command line.
Jan Soska
Honored Contributor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

ahh... ok.
Probably there is kind of early stage problem... Do you have more ilo3's with the same behavior? Probably rise a hw support ticket to fix issue.

Jan
Jimmy Tn
Occasional Advisor

Re: iLO 3: Change Remote Console Port using cpqlocfg not working

Yes, I have the exact same issue with all the iLO 3 I have tested on. I'll guess I have to raise a support ticket. Thank you for the effort, Jan.