Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO Administrator on BL20p

David Harris_11
Occasional Visitor

iLO Administrator on BL20p

Hi,

Can anyone tell me how to reset the iLo administrator password as the password has been forgotten.
1 REPLY
acartes
Honored Contributor

Re: iLO Administrator on BL20p

Here are three options:

1- Look on the sticker. If you are still using the default Administrator password, it is printed on a sticker attached to the blade.

2- Use the iLO Security Override Switch. It is located inside the server, so you will have to power-off and open the case to access the switch. This defeats iLO security and allows you to access iLO without valid credentials. From there, user administration can be used to set a new password.

3- Or, use HPONCFG and use a RIBCL(XML) script to install the credentials you want:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=668077