I have noticed that one activation key can be used on all my ilo boards... I have some activated ilo boards with the same key, now i'm wondering if this would have any effect on the features of all of these cards?
The LICENSE command activates or deactivates the iLO's advanced features. For this command to parse correctly, the command must appear within a RIB_INFO command block, and RIB_INFO MODE must be set to write. The user must have the configure iLO 2 privilege to execute this command. On a ProLiant BL Class server, there is no need for a licensing key. Advanced features are automatically activated. Example:
Hope this helps. Thanks Deepak
Performance is compulsion and not an option if my existence is to be justified.
Yes you can remove/deactivate license without reverting back to factory setting by either doing one of the following: 1:by logging into iLO2 using command line (telnet/secure shell) and execute command "delete /map1 license" 2:Use RIBCL command for licensing and send this to iLO using CPQLOCFG/HPONCFG utilities Example: The LICENSE command activates or deactivates the iLO's advanced features. For this command to parse correctly, the command must appear within a RIB_INFO command block, and RIB_INFO MODE must be set to write. The user must have the configure iLO 2 privilege to execute this command. On a ProLiant BL Class server, there is no need for a licensing key. Advanced features are automatically activated.
Example:
LICENSE parameters
ACTIVATE followed by a valid KEY value signals the activation of the iLO 2 advanced pack licensing. KEY specifies the license key value. The key should be entered as one continuous string. Commas, periods, or other characters should not separate the key value. The key will only accept 25 characters; other characters entered to separate key values will be interpreted as a part of the key and result in the wrong key being entered. Using RIBCL 105
DEACTIVATE signals the deactivation of the iLO 2 advanced pack licensing.
LICENSE runtime errors The possible LICENSE error messages include: â ¢ License key error. â ¢ License is already active. â ¢ User does not have correct privilege for
Performance is compulsion and not an option if my existence is to be justified.
If the link does not work do this Goto www.hp.com/servers/lights-out Under iLO2 Advanced section click "iLO2 Advanced". On your right you must see "Supports & documents", click and then click the "manuals" link which will give links to many other documents and this documen as well.
Thanks Deepak
Performance is compulsion and not an option if my existence is to be justified.
We have procured approximately 12 servers DL 380 G5 5160 and ML 370 G5 5150 for Pakistan. We are facing problem for ILO licenses for said servers or please provide us the AKA (Activation Key Agreements) for further coordination.
