Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO Network Settings

Mike Murawski
Occasional Visitor

iLO Network Settings

We have a network here with a few different address ranges:

192.168.248.XXX
192.168.254.XXX
192.168.255.XXX

I am trying to configure all of our HP blades to be be on a separate range (ex. 192.168.170.XXX) However I can not get a connection when trying to do this.

I can connect to the iLO when the settings are:
IP: 192.168.255.180
SUB: 255.255.255.0
GATE: 192.168.255.254

I have tried a few different setting for the iLO when trying to make it another address range with no luck. Any help is appreciated.

Thanks
1 REPLY
barnett chan
Trusted Contributor

Re: iLO Network Settings

Try a subnet of 255.255.252.0 or just 255.255.0.0.