HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO power config settings

 
Jon_151
Regular Advisor

iLO power config settings

This is on a DL380 G3 with standard iLO Firmware Version: 1.92 04/24/2008

I set the server to be automatically powered on and press submit. I log out then back in and automatically powered on is still set to yes. If I removed power and plug it back in the server does not start and the automatically powered on setting is set to off.

Any help is greatly appreciated.
1 REPLY
Jon_151
Regular Advisor

Re: iLO power config settings

I got it to work. I set the iLO back to factory defaults and now the setting works.