Server Management - Remote Server Management

iLO2 locked up

 
jlbillman
Occasional Contributor

iLO2 locked up

I have a DL380 G5 and I cannot access the iLO from the netowork or from the OS on the machine.  SIM cannot acces the iLO either. I tired powering off and unplugging the box for about 2 minutes and powering up again.  This did not change anything, I still can't get in.

 

Do I need to leave the power unplugged longer?  Anything else I can do to recover the iLO?  Replace the logic board?

 

 

1 REPLY 1
Jimmy Vance
Honored Contributor

Re: iLO2 locked up

Does the iLO show up during POST?  i.e. Press F8 to configure iLO

 

Verify there isn't an issue with the  cable or switch port

 

 

No support by private messages. Please ask the forum!