Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Remote Server Management
cancel
Showing results for 
Search instead for 
Did you mean: 

unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

SOLVED
Go to solution
linux4u
Occasional Visitor

unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

I have been unable to change the SERIAL_CLI_SPEED via hponcfg on a DL380G7 via hponcfg.

My Mod_Global.xml file:











When I run hponcfg -f Mod_Global.xml I get a "Script Successful" message.

Then using the following xml:








I get the following:
Firmware Revision = 1.16 Device type = iLO 3 Driver name = hpilo


















Script succeeded

I have applied the Proliant Support Pack 8.60 to this machine as well.
3 REPLIES
Jimmy Vance
HPE Pro

Re: unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

What version of hponcfg are you using?



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
linux4u
Occasional Visitor

Re: unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

Currently using hponcfg version 3.1.0
Oscar A. Perez
Honored Contributor
Solution

Re: unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

This is a known iLO3 firmware issue that has been fixed in the new firmware version 1.20.
1.20 should hit the web by the end of this month.



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!