Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

1785 Drive Array Not Configurer - How to Not receive the alert on a server

 
Highlighted
Guillaule
Frequent Advisor

Re: 1785 Drive Array Not Configurer - How to Not receive the alert on a server

hi

 

i'll give you an update on Monday after restart


Regards

Highlighted
Guillaule
Frequent Advisor

Re: 1785 Drive Array Not Configurer - How to Not receive the alert on a server

Hi

 

Server restart this week end so i received an email fro mHPSIM and an Event 

 

Event Name: (SNMP) POST Errors Occurred (6027)

URL: https://xxx.xxxx.xxxx..xxxx2381/

Event originator: xxxxxx

Event Severity: Minor

Event received: 26-Oct-2014, 00:24:38

 

Event description: One or more POST errors occurred.  Power On Self-Test (POST) errors occur during the server restart process. Details of the POST error messages can  be found in Integrated Management Log

 

 

Health status is green

 

So the pb is .. how to not receive this event drom tis particular server ?


Regards

Highlighted
Andrew_Haak
Honored Contributor

Re: 1785 Drive Array Not Configurer - How to Not receive the alert on a server

Hello again,

 

I looked at earlier posted solutions.  Please look at http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/POST-Error-1785-Drive-Array-not-Configured/td-p/5279455

Your problem seems to be solved here. Look at the section about an array controller with no or unconfigured disks .

Kind regards,

Andrew
Guillaule
Frequent Advisor

Re: 1785 Drive Array Not Configurer - How to Not receive the alert on a server

Hi thanks

 

so .. it seems there is  no real solution ... 

This error message occour, when a smart array controller find no configuration on the drives.
You will allways get it on the very first boot.
Or if you have a unused array controller in the system, then you will get it on all boots.