Server Management - Systems Insight Manager
1748119 Members
3253 Online
108758 Solutions
New Discussion

Asked to specify worst case power consumption on tape library (SIM 7.0)

 
thorsten_s
Occasional Visitor

Asked to specify worst case power consumption on tape library (SIM 7.0)

Hi forum,

 

I've taken over the support of our Insight Manager system which was upgraded to version 7 recently. Since then we get a couple of weird alarms. One of them asks to specify worst case power consumption for a tape library. The problem with that is, that there is are no power settings on that type of device like on a server.

 

Has anybody a clue on how to circumvent that message other than automatically clearing it ?

 

The device is connected to power feeds and racks.

 

Thanks

Thorsten

 

 

Description An incomplete configuration has been detected

Event Category Power/Thermal Events

 

Problem Description: Worst case power consumption is not specified for system EMLIBFR10002.

Recommended Actions: Edit EMLIBFR10002 and manually specify the worst case power consumption value.