Server Management - Systems Insight Manager
1748031 Members
4936 Online
108757 Solutions
New Discussion

Re: BL p-Class enclosure management via SIM

 
Andy Stubbings
Frequent Advisor

BL p-Class enclosure management via SIM

My basic question is how do you do it, is there a management port? Do you do it via an ILO port?

I have inherited an installation of SIM that shows a Rack with 2 enclosures, both enclosures have 7 blades installed and active, but SIM only shows 1 server in each enclosure, and I can't see any way to add the other servers so they show in their correct position in the SIM view.

I have physical access to the hardware.

Any help would be appreciated.

1 REPLY 1
David Claypool
Honored Contributor

Re: BL p-Class enclosure management via SIM

This should help: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00257374/c00257374.pdf

Make sure the iLO of each of the blades is discovered in HP SIM.