HPE Community
Server Management - Systems Insight Manager
1752785 Members
5846 Online
108789 Solutions
New Discussion

Re: Blade server rebooting, overheating since adding hp agents

 
Andrew Knoke_1
Advisor

‎04-26-2011 12:00 PM

‎04-26-2011 12:00 PM

Blade server rebooting, overheating since adding hp agents

I recently added hp agents to my blade servers. All of them are reporting healthy with the exception of one server which now continually reboots. Before adding the agents on this server it did have event id 1135 regarding a temperature sensor. Though when looking at hpsim none of the temperatures seem too high. Also before adding the agents the fans in my blade enclosure ran at a steady 35%. Now if I even turn this server on the fans go to 90% and stay there. After awhile the server will then reboot on its own. I have the latest ILO and HPSim agents. I have seen others having similar issues all the way back to the Spring of 2009. Any suggestions?
0 Kudos
Reply
1 REPLY 1
shocko
Honored Contributor

‎04-26-2011 11:37 PM

‎04-26-2011 11:37 PM

Re: Blade server rebooting, overheating since adding hp agents

If you have latest ilo firmware, i'd log a hardware call to hp.
If my post was helpful please award me Kudos! or Points :)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.