HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade server rebooting, overheating since adding hp agents

 

Blade server rebooting, overheating since adding hp agents

I recently added hp agents to my blade servers. All of them are reporting healthy with the exception of one server which now continually reboots. Before adding the agents on this server it did have event id 1135 regarding a temperature sensor. Though when looking at hpsim none of the temperatures seem too high. Also before adding the agents the fans in my blade enclosure ran at a steady 35%. Now if I even turn this server on the fans go to 90% and stay there. After awhile the server will then reboot on its own. I have the latest ILO and HPSim agents. I have seen others having similar issues all the way back to the Spring of 2009. Any suggestions?
1 REPLY
shocko
Honored Contributor

Re: Blade server rebooting, overheating since adding hp agents

If you have latest ilo firmware, i'd log a hardware call to hp.
If my post was helpful please award me Kudos! or Points :)