Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade serves HWstatus: unknown

 
MyMatt
Occasional Advisor

Blade serves HWstatus: unknown

Here is the environment:
SIM version 5.1
HP BladeSystem Integrated Manager 2.3
All enclosures are c7000
All our blades are BL465c G1 with PSP 7.91~8.11A, iLO version: 1.5~1.61

All blades were discovered successfully, 60% were shown under enclosures with correct information. The problem is on the rest of the blades:
They are listed under the enclosure with names like "RackName_EncName_Slot#-FRONT", not the system name I expected. The health status icon is a grey square, after I chose "resume monitoring", the health status became a blue dot with ? mark in it, and the health status is "HWstatus: unknown". ILO information are not displayed.
But if I search the system name in SIM, all the information shows up correctly except not mentioning the rack and enclosure info.

Anyone know what's going on? The trust setting in management homepage are all same.
7 REPLIES
JKytsi
Honored Contributor

Re: Blade serves HWstatus: unknown

Hi,

those are discovered systems through ilo or OA. You can delete those and discover your servers from LAN IP's
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
MyMatt
Occasional Advisor

Re: Blade serves HWstatus: unknown

Still no luck by discoverying IP.

When I discovered the OA name, half of the servers are ok but rest just didn't come out with their system name.
JKytsi
Honored Contributor

Re: Blade serves HWstatus: unknown

all servers have agents configured properly (snmp)?
Remember to give Kudos to answers! (click the KUDOS star)

You can find me from Twitter @JKytsi
MyMatt
Occasional Advisor

Re: Blade serves HWstatus: unknown

Yes, as all the problem servers has proper infomation displayed under SIM just missing the association part to enclosure...
MyMatt
Occasional Advisor

Re: Blade serves HWstatus: unknown

Here's the screen cut
Adrian Clint
Honored Contributor

Re: Blade serves HWstatus: unknown

Is there a common ilO username/password on all servers and is this in the global protocol settings?

Try sending a repair agents to the servers and IP addresses that you cannot identify correctly.
MyMatt
Occasional Advisor

Re: Blade serves HWstatus: unknown

Yes, we are using universal username and password.

Send the repair agent didn't work.