HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure HP SIM to monitor and alert on SNMP value?

 
SOLVED
Go to solution
nbhms
Advisor

Configure HP SIM to monitor and alert on SNMP value?

Can HP SIM be manually configured to monitor and alert on an SNMP value? I have imported MIBs for some 3rd party devices that allow reading of SNMP values but do not send traps. I'd like to monitor several of those values and trigger alerts/events when those values excede certain amounts.

thanks
3 REPLIES
David Claypool
Honored Contributor
Solution

Re: Configure HP SIM to monitor and alert on SNMP value?

No, HP SIM does not 'walk the MIB' for third party devices.
nbhms
Advisor

Re: Configure HP SIM to monitor and alert on SNMP value?

If a 3rd party device does send traps, and I import the MIBs for it, would traps from that device be "registered events", or would I still have to check the box for "accept unregistered events" on the Event Filter Settings page to receive traps from the device?

Thanks,

nbhms
David Claypool
Honored Contributor

Re: Configure HP SIM to monitor and alert on SNMP value?

The would be registered and translated.