Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring HP SIM & Arcserve SNMP Traps

SOLVED
Go to solution
C Welbourne
Occasional Visitor

Configuring HP SIM & Arcserve SNMP Traps

Hi,

I Have an installation of HP SIM 5 SP4 and would like to configure it to recieve alerts from Arcserve Backup 9 & 11.1 versions.

Has anyone done this succesfully ? Im struggling on the Arcserve Setup, On setting the SNMP Recipient Its acking for a 'Manager Name' and either an IPX or IP address.

Is there anything specific i should enter for the Manager Name ? im guessing the ip os for the SIM's ip address.
3 REPLIES
Rob Buxton
Honored Contributor
Solution

Re: Configuring HP SIM & Arcserve SNMP Traps

That sounds like it should be the IP Address of the HPSIM Server.
In addition, the community name that the trap is sent also needs to match the community names set in HPSIM. Unless you've actively changed these the default "public" should be okay.

You'd also need to check if the ArcServe MIBs are loaded into HPSIM by default, otherwise you will need to also do that.
sudesh_5
Frequent Advisor

Re: Configuring HP SIM & Arcserve SNMP Traps

Hi,

Also , HP SIM supports only V1 traps.

cheers
sudesh
C Welbourne
Occasional Visitor

Re: Configuring HP SIM & Arcserve SNMP Traps

Cheers that solved it. I know it sounded simple, but thanks anyway.