HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360/G5,ILO firmware 1.94 S/Start 8.20, Firm 8.40 No Alerts

 

DL360/G5,ILO firmware 1.94 S/Start 8.20, Firm 8.40 No Alerts

can someone tell me if theres an issue with
having
HP DL360/G5 Servers running W2k3 SP2
HP SmartStart 8.20 / Firmware 8.40
ILO version 1.94

When i shutdown the server I get no alerts from HP SIm 5.3 SP1 - Lastest MIB/Hotfixes applied too
I have shutdown other servers With SmartStart 8.20 and they respond fine but they dont have ILO enabled
3 REPLIES

Re: DL360/G5,ILO firmware 1.94 S/Start 8.20, Firm 8.40 No Alerts

Ive narrowed my Server issue down I think its NLB (Network load balancing)

When its in effect Insight manager doesnt really work well.

All my G5 servers are currently running NLB. except one that doesnt have it configured and HP Alerts appear on this fine
Rob Buxton
Honored Contributor

Re: DL360/G5,ILO firmware 1.94 S/Start 8.20, Firm 8.40 No Alerts

If a server is shutdown it's the HW Polling task that picks it up.
Check how often that task is running.

Re: DL360/G5,ILO firmware 1.94 S/Start 8.20, Firm 8.40 No Alerts

Servers with NLB and ILO in use and configured dont seem to send an alert when shutdown.
Same model server no NLB and ILO not configured sends an alert.