Data Collection Retry Timeout

[davidmcmurray]

Error: Data Collection retry was abandoned for this system at the end of the timeout
period

HP SIM v7.3

I have three v7.3 servers, just one does it currently.

Global Protocol Settings:

WBEM unchecked

WS-MAN unchecked

SSH unchecked

Intermittent times of day.   One to Two per day.

Thoughts welcome.

Thank you,

Dave McMurray

[Pootch]

This happens on network timeouts / or agents problems when the SIM Server tries to pull the data..

There is a weekly task for Data collection... this should be enough..

This system failed to respond to SNMP in the timeout interval.
Root Cause: The system is no longer running SNMP, or the agent is responding more slowly than the timeout value set for the system.
Corrective Action: Check network and configuration of target system.  Try adjusting the SNMP timeout value for the system in the System Protocol Settings page.  Verify the SNMP read community has not changed.  Rerun Data Collection.

Data collection on this system was aborted due to a timeout or it was abruptly stopped.  Data may be incomplete.
Root Cause: Data collection on the target system has taken longer than allowed.  This can be due to network connectivity issues, a busy target system, or timeout values set too low.
Corrective Action: Check network and configuration of target system.  Check the following settings (and adjust values as needed) using mxglobalsettings: Detached_DC_Timeout, Storage_DC_Timeout, DC_Abandon_Latency (all in seconds)



                        

[zarulzakuan]

If the server is ESXi machine and using WBEM protocol, restart the CIM server. Works most of the time for us