Server Management - Systems Insight Manager
1748074 Members
5180 Online
108758 Solutions
New Discussion

Difference between Diagnostic and Management Homepage array results

 
Nagios911
New Member

Difference between Diagnostic and Management Homepage array results

Hi everybody,

 

I've a little problem.

 

In the company, we've a SNMP-based monitoring system. For the HP machines, informations are queried by Nagios from the Insight Management Homepage.

 

So for some disks arrays, all seems OK in the Management Homepage (and also in my monitoring system) but if I do a diagnostic with HP Insight Diagnostic, this last tell me that there are some mistakes on a few disks...So you guess that a lot of mistakes could be totally hidden for the monitorinf system ! 

 

My question: is it possible to synchronize the results of the HP Diagnostic with the Management Homepage ? Or at least, to build my SNMP queries on the diagnostic results and pass through the Management Homepage ?

 

Thanks for your answers,

 

N

 

 

P.S.This thread has been moved from  Insight Remote Support>general to ITRC HP Systems Insight Manager Forum- HP Forums Moderator

1 REPLY 1
BPE
Esteemed Contributor

Re: Difference between Diagnostic and Management Homepage array results

Did you wait for the update of the healthstate in the SMH?
If you get an error in the diagnostics run it could take up to 5 minutes until you can see it in the SMH ! I would use SNMP traps.