Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

Discovery see's systems but will not display them.

Nick Bedi
Occasional Contributor

Discovery see's systems but will not display them.

When I try to manually discover a system it will not show up as a managed server.

It appears to detect the system fine in the View Task Results Page:

Starting identification process...
Checking for known running web servers.
Checking for System Management Home Page and other HP web agents.
Received a response from the system management homepage, this system supports SMH.
Checking for WBEM support on system.
WBEM is globally disabled, skipping WBEM identification.
Running WBEM rules based identification.
WBEM is globally disabled, skipping WBEM identification.
Running WS-Man identification.
Checking for SNMP support on system.
The system responded to a SNMP request, it supports SNMP.
Running SNMP base Cluster identification using common cluster MIB.
This was not a system with the common cluster MIBs supported.
Running HP ProLiant management agent identification
System does not have the SNMP ProLiant Server (foundation) agents installed.
Running HP NetServer identification.
System supports the NetServer SNMP agent, adding system type
Running HP-UX SNMP identification.
System does not have the HPUX SNMP agents installed.
Running SNMP System Type Manager identification.
No matching SNMP System Type Manager rule was found.
Checking for DMI protocol support.
The system does not have Windows DMI support.
Running DMI System Type Manager identification.
The system does not have Windows DMI support.
Running HP-UX DMI identification.
The system does not have HP-UX DMI support.
Running HP/Compaq Desktop identification.
The system does not have Windows DMI support.
Running HP DMI Desktop identification.
The system does not have HP DMI Desktop support.
Running Generic DMI identification.
The system does not have Generic DMI support.
Checking for SSH protocol support.
The system supports SSH protocol
Running Storage identification.
Storage identification completed.
Running HP Service Guard Identification.
The system is not part of HP Service Guard cluster
idPluginStart.IPMCompatible
Running VM identification.
Checking for license data on system.
SMH trust status is true.
Running limited data collection for common attribute.
Done with limited data collection, checking retrieved data.
Building system relationships.
System identification done with this system.

However, once this is complete I cannot find the system listed under SIM 5.1 anywhere.

Any assistance would be greatly appreciated.
1 REPLY
Rob Buxton
Honored Contributor

Re: Discovery see's systems but will not display them.

Check the Discovery filters - the above indicates HPSIM found the device but looks like it couldn't identify it.
So, it's probably being listed as an "Unmanaged" device.
You don't want to exclude Unknown or Unmanaged devices.