Server Management - Systems Insight Manager
1748153 Members
3524 Online
108758 Solutions
New Discussion юеВ

Disk thresholds not saving

 
Stefan Dorn
Occasional Contributor

Disk thresholds not saving

When I set a disk threshold, either from SIM or from the server's system management homepage, after I click save or run the task, the settings are not stored. What could be causing this?
4 REPLIES 4
Stefan Dorn
Occasional Contributor

Re: Disk thresholds not saving

I should have pointed out this is happening on *any* server I try to set. I'm running the latest proliant support pack, and SIM 5.0 with the latest service pack.
Daniel Leblanc
Honored Contributor

Re: Disk thresholds not saving

is everything like this set?:

1 All you re server SNMP setting are set for TRAPS>Communite name(correc name),TRAPS>Communite name>traps destination> 1-server Insight & 2-127.0.0.1
#2 All you re server snmp setting are set for SECURITE> Accepted community name>Communite name(correc name),All you re server snmp setting are set for SECURITE> Accepted community name>Communite name> Accepted packet from these host>1-server Insight & 2-127.0.0.1.

3# in youre Home page manegement>Setting>Securite
A_IP Binding-Nothing
B_IP Restricted Login-Nothing
C_Local Server Certificate-Nothing
D_Local/Anonymous Access-Nothing
E_Trust Mode>Secure Trust Modes:Trust by Certificate
F_Trusted Management Servers>Importe you Insight server certificate
G_User Groups-Nothing
Stefan Dorn
Occasional Contributor

Re: Disk thresholds not saving

Thanks for the ideas. Turns out that my SNMP settings got deleted somehow, so there was no write string set.
Daniel Leblanc
Honored Contributor

Re: Disk thresholds not saving

Ok no trouble, don't forget to apply you re point and close the message.

HAve a nice day!

Dan