Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

ESX Server and System Management Home page

SOLVED
Go to solution
Chris H Ebright
Occasional Contributor

ESX Server and System Management Home page

I have ESX 3.5 (No Updates)server that when I log onto the system manaement homepage it tell me the server model is unknown. Ports 2301,2381,280 are open. As far as I can tell SMNP is configured. It does allow me to set the trusted management server and SIM does not see any of the guests on it. I loaded version 8.1 of the management pack. It is a Proliant DL385. Any suggestions that might help me see the hardware on the system management home page and also see its guests in SIM?
3 REPLIES
Rob Buxton
Honored Contributor
Solution

Re: ESX Server and System Management Home page

Run an ID task to ensure it is able to access SNMP.
With those ports open, snmp correctly configured and the latest agents it should work.

Search this forum, there have been a number of posts covering snmp and there are snmp examples you can compare with.
Chris H Ebright
Occasional Contributor

Re: ESX Server and System Management Home page

Thanks for the help, I endedup reinstalling the management software and reentering all the SNMP settings and that did it
Chris H Ebright
Occasional Contributor

Re: ESX Server and System Management Home page

Reinstalled Management Agents and reset SNMP settings