G3 Server keeps repeating same message

[Michael Jay_2]

We have a ML 370 G3 running HP Agents 7.1 and this morning it started repeating over and over the messages:

Fan Removed
Fan Redundancy Failed
Fan Inserted
Fan Redundancy Restored

When we look at the physical server or even at the agent we see no problems and the above alerts happen within seconds of each other.

We've rebooted but that did not help. We've disabled monitoring for now but were wondering do we have a real problem or are these false alerts and if so how do we stop them?

TIA.

MJ

[Rob Buxton]

You might want to try reseating the fans if they're removable.
Something must be going on in the server to send the traps out.

[Bob Curnock]

I have the same issue on a DL380G3 - getting hundreds of errors escalated to SIM weekly for the last 8 months - the server is at a remote site in another country so inaccessible unless a costly Locally based Engineer is engaged. Firmware/Drivers are at the same level as our other DL380's.