Server Management - Systems Insight Manager
1748233 Members
3472 Online
108759 Solutions
New Discussion

Re: G8 ilo's can't connect to remote host for Data Collection

 
SOLVED
Go to solution
ccoho
Advisor

G8 ilo's can't connect to remote host for Data Collection

After upgrading to the 2.6 firmware on all of my servers, now my G8 servers are reporting "Cannot connect to remote host" when trying to send data collection.  My G9's seem to be reporting fine.  I've confirmed connectivity (and I even have a G8 and G9 at the same location configured the same, the G9 connects, the G8 does not).

When I was investigating I checked my DNS server and it seems it is doing a lookup for services-isee.hp.com, but that DNS lookup is failing.  I even did a DNS lookup elsewhere to confirm it just wasn't my DNS server having issues.

Anyone else having this issue?  Any known fix?

3 REPLIES 3
Torsten.
Acclaimed Contributor
Solution

Re: G8 ilo's can't connect to remote host for Data Collection

Related to Insight remote support?

I have seen the same on some servers.

I solved this by unregister/register again (from ILO -> Remote Support screen) .


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
ccoho
Advisor

Re: G8 ilo's can't connect to remote host for Data Collection

OK, going to give that a try, thank you.  I will post back if it solved it.

ccoho
Advisor

Re: G8 ilo's can't connect to remote host for Data Collection

That did solve it!  Unfortunately i now have to re-register 15 other devices.

Thank you!