Generating a report over current agent settings for multiple systems?

[Per Nestande]

Hi,

How do I generate a report, that shows the current hp foundation agent settings for selected/all servers?

Regards,
Per Nestande
--

[David Claypool]

One would presume if they aren't correct that HP SIM wouldn't have a way of retrieving the information...Rather than query what setups are, use Replicate Agent Settings or Configure/Repair Agents to distribute the correct settings.

[Per Nestande]

The reason I asked is this:

When replicating the agent settings I got the error message:
Successes: 0; Failures:
HP Foundation Agent There was an error processing the request to the agent, possibly due to a version conflict.
...

I do not know if there is any real errors, but the 0 successes does not look too promising.
Nevertheless, when I manually checked each server (which is *very* time consuming) everything looked ok. :-?
--

[Rob Buxton]

Maybe step back a bit and run a report to check the version of software out there.

There 's a Software section and you can sort by Description.

You can also replicate the settings for the VCA to control what Reference Pack is being used.

Agents can be configured before deployment and so an update of the agents starts to pull things into line.

[Per Nestande]

I have no solution to this question. I will just have to do the job manually.