HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Insight ver 5.1 - Suspend by IP

 
Bob Banister
Occasional Advisor

HP Insight ver 5.1 - Suspend by IP

Is it possible to suspend monitoring on a block of IP addresses as opposed to suspending each inidividual IP address?

Thanks,
Bob Banister
3 REPLIES
David Claypool
Honored Contributor

Re: HP Insight ver 5.1 - Suspend by IP

See this thread: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1199841513885+28353475&threadId=805599

You could use one of the techniques there to create a custom command in HP SIM. That way you could choose one or more systems with the check boxes, or display a collection and select the entire collection, and have the custom command operate on all of them with a click of the pull-down menu.
Rider
Trusted Contributor

Re: HP Insight ver 5.1 - Suspend by IP

For HP SIM 5.1 scripts are not required to suspend block of IP address or collections. HP SIM has its own tool under Options--System Properties---Suspend or Resume Monitoring. You can select multiple nodes or collections to suspend in a block. For more info refer to below link

http://docs.hp.com/en/5991-4500/ch02s01.html
A Real man makes his own luck
Bob Banister
Occasional Advisor

Re: HP Insight ver 5.1 - Suspend by IP

Options - system properties - and you can select the device you wish to suspend. However my intention was to block IP addresses before they come on line. SIM only lets one block was has already ben identified. Makes sense I susppose.