Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 4.2 -SP2

SOLVED
Go to solution
Alfred Aragon
Frequent Advisor

HP SIM 4.2 -SP2

Does anyone know what would cause the system page to not display all of a sudden on all servers?
14 REPLIES
Daniel Leblanc
Honored Contributor
Solution

Re: HP SIM 4.2 -SP2

If you want people to be able to help you out,you should apply you re points, in you 2 other questions you have posted.

People look into you're profiles and if you did not apply you're points in the passe they will not want to help you out,some will but most wont.

A small help how to get fast help.

And for you're question you should upgrade to 5.1 it will also help out in DST.

Daniel
Alfred Aragon
Frequent Advisor

Re: HP SIM 4.2 -SP2

Daniel- Thanks for that tip. You have been rewarded. :)
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

Did you try to reboot you're server?
Alfred Aragon
Frequent Advisor

Re: HP SIM 4.2 -SP2

We can not upgrade at this time. Is there an alternate solution for this problem? It was working fine yesterday.
Alfred Aragon
Frequent Advisor

Re: HP SIM 4.2 -SP2

Yes. But still no luck. I have also stopped the HP Insight Manager Service. Then I ran the mxconfigrepo -f command. Restarted SIM. But still no luck.
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

Try to redisvore them for fun!?

Just to see what happens
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

So?
Alfred Aragon
Frequent Advisor

Re: HP SIM 4.2 -SP2

How would I rediscover them? Not too familiar with SIM.
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

No problem, you go to the MENU of SIM section OPTION>DISCOVERY> you will get a page and then you have the choice on top of AUTOMATIQUE_MANUEL_HOSTS FILES,you should be good at the first section AUTOMATIC, there should be bouton RUN NOW it should discovered all you system, you may have to look in the EDIT bouton to see if you're are set to discovere you range of ip addresse
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

Oh yes if you have to programme it put it this way
10.10.1.1-10.10.1.254
131.195.3.1-131.195.3.254
ect...
for all you're range if you only have then that ok only one will do,if you have more then one do them all, even if you get a message of error, it will work fine i have over 4000 with a message if being to much but it work fine
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

Scheduling once a week should be fine max.
Alfred Aragon
Frequent Advisor

Re: HP SIM 4.2 -SP2

We discover servers manually. How can I export or save all the servers I currently have discovered?
Daniel Leblanc
Honored Contributor

Re: HP SIM 4.2 -SP2

You will not lose the server you already have found,the new ones will add on to that liste
Alfred Aragon
Frequent Advisor

Re: HP SIM 4.2 -SP2

Servers only get added if a Change Management is submitted. So I can not add servers that do not have a CM submitted to add the server to SIM. I would only like to rediscover the ones I currently have discovered.