HPE Community
Server Management - Systems Insight Manager
1751728 Members
5837 Online
108781 Solutions
New Discussion

Re: HP SIM 5.0 SP4 Pages Failing

 
Todd Henderson_2
Occasional Advisor

‎03-27-2006 09:57 AM

‎03-27-2006 09:57 AM

HP SIM 5.0 SP4 Pages Failing

Has anyone ever ran into this problem and know the solution? I am running HP SIM 5.0 SP4 and paging through the modem has been working fine for a long time now. Starting yesterday, I began receiving the following message when paging kicks off in my tasks results:

Timeout waiting for the pager service to start the TAP protocol. Phone: xxxxxxxxx Pin: xxxxxxx

Has anyone see this issue before and know the fix?

Thanks!
0 Kudos
Reply
1 REPLY 1
Trung Hua
Occasional Advisor

‎05-11-2006 06:06 PM

‎05-11-2006 06:06 PM

Re: HP SIM 5.0 SP4 Pages Failing

You may want to try lowering the baud rate the modem is set to.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.