HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 5.0 sending two status messages for each error or issue

 
Dave Bannister
Occasional Contributor

HP SIM 5.0 sending two status messages for each error or issue

Operating system: Windows 2003
Version: Systems Insight Manager 5.0 with SP5 - Windows
Build version: C.05.00.02.00

Can anyone tell me why our SIM server always sends duplicate status messages for just about everything that gets reported?


Example:


Not cleared POST Errors Occurred (6027) rmregapps022 2/21/07 3:52 PM Server
Not cleared POST Errors Occurred (6027) rmregapps022 2/21/07 3:52 PM Server



The contents of each message is exactly the same.
2 REPLIES
Rob Buxton
Honored Contributor

Re: HP SIM 5.0 sending two status messages for each error or issue

Are two events generated each time?

Could be you've got two Trap destinations configured, possibly one each for different community strings.
Or, if only a single event is being received but you've got two alerts you have overlapping event handlers that are both reporting the event.
Rancher
Honored Contributor

Re: HP SIM 5.0 sending two status messages for each error or issue

Rob, thank you! I have also been having this trouble but was told that one alert was from the server, and the duplicate alert was sent from the iLO card. But it wasn't happening on all of my servers. Sure enough, some servers have two trap destinations: one is the IP address of the CIMS server, and the other is the name of the CIMS server!