Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 5.2 - Can't Install initial PSP

kris takach
Occasional Contributor

HP SIM 5.2 - Can't Install initial PSP

When i try to install the 8.15 PSP on an HP server, i get an error stating "Dependancy Failed. Its installation requires one or more of the following to be installed.
- HP Proliant advanced system management controller driver for windows
- HP Proliant iLO advanced and enhanced system management controller driver for windows
-HP Proliant iLO 2 management controller driver for windows."

I installed those but with error.

Anyone have any ideas?
5 REPLIES
David Claypool
Honored Contributor

Re: HP SIM 5.2 - Can't Install initial PSP

Which server model?
kris takach
Occasional Contributor

Re: HP SIM 5.2 - Can't Install initial PSP

It is a DL 380. But it is a VMWare ESX server. Could that be the problem? If so, what can i do to fix it?
Steven Baillie
Trusted Contributor

Re: HP SIM 5.2 - Can't Install initial PSP

kris takach
Occasional Contributor

Re: HP SIM 5.2 - Can't Install initial PSP

So you can not use HP SIM to monitor a server's health which has VMWare installed? The VMWare ESX software installs the HP agent and the ESX interface monitors the health?
Rob Buxton
Honored Contributor

Re: HP SIM 5.2 - Can't Install initial PSP

You install the agents as described above.
The agents are configured to send SNMP Traps if they detect a hardware issue. HPSIM polls to ensure the server is available.
This is the same process for Windows, ESX and Linux on HP Proliant servers.

The installation is different on ESX. I recommend extracting the file and then editing up the hpmgmt.conf file as described in the README file and using that in a silent install.