HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 5.2 can't see cmom server

 
kris takach
Occasional Contributor

HP SIM 5.2 can't see cmom server

Our Sim server cannot see the cmom server on our commandview server. We also have a cmom server using port 60001 for brocade switches on the same commandview server. I am new to using HP SIM to monitor storage equipment. SIM can discover the equipment, but SIM does not receive any traps from the commandview server. Anyone have any ideas to test or try out?
1 REPLY
Rob Buxton
Honored Contributor

Re: HP SIM 5.2 can't see cmom server

A few different things involved here.

For traps, check SNMP settings, especially the Trap Destination. You can use the HP Management Agents GUI (under Control Panel) to send a test SNMP Trap.

HPSIM discovers EVAs via CommandView. Some of that depends on the version of CV that you're running. But what you will need are some credentials added that HPSIM can use to access CV. Those credentials need to be in the Storage Admins group. Google wbemdisco for more on that.