Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 6.0 and wbem events

Sergey Yushkov
Occasional Visitor

HP SIM 6.0 and wbem events

Hi all. I got fresh installation of HP SIM 6.0 on windows 2008 SP2 x86 virtual machine.
I also got a ProLiant DL360 G5 server which a add to hp sim.
on dl360 i generate test even using hp util "Test WMI Events" but it is not showing in hp sim in events tab.

on hp sim server:
i check "Accept unregistered events"
and hp sim server got 2 services running:
"Pegasus WMI Mapper" and "Pegasus WMIMapper Indications Service".
i subscribe dl360 to wbem events, and i got correct output of "mxwbemsub -l" command.
I also open all needed firewall ports.

in Management Protocols i see - HTTP:, WBEM:1.0, SMH:2.0
http://i41.tinypic.com/25hmqs7.png

on dl360 i run
enableRWMI.exe -a:MY_DOMAIN\my_wbem_account

i also carefule read this document (http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01509052/c01509052.pdf)

still no luck :(


any ideas?



and as say Rob Buxton:

"Best to start a new thread.
I'd just say to check the items noted here.
Ensure you have set up the WMI part and the two services are running.
Ensure you have subscribed to the services."


3 REPLIES
Sergey Yushkov
Occasional Visitor

Re: HP SIM 6.0 and wbem events

as i understand hp sim recive events on tcp port 50004.
I got process mxdomainmgr.exe listening this port on hp sim server.
In firewall i open inbound tcp: 2301, 2381,5989,5988,50000,50001,50002,50003,50004

i find good document about hp sim ports
http://www.hp.com/wwsolutions/misc/downloads/management/hpsim/HPSIM_Security_WP.pdf

i even try to sniff traffic on hp sim server, using wireshark (www.wireshark.org) and there are no packets coming to hp sim server on port 50004.

Sergey Yushkov
Occasional Visitor

Re: HP SIM 6.0 and wbem events

i only recive enets if i reboot of turn off monitoring server

like this:

Event Severity: Critical
Event received: 30-Mar-2010, 16:09:26
Event description: The current system is no longer reachable from the central management server, hardware status polling has marked this system as not responding


Event Severity: Normal
Event received: 30-Mar-2010, 16:10:19
Event description: The current system is now reachable from the central management server, hardware status polling has marked this system as responding
guru4hp
Advisor

Re: HP SIM 6.0 and wbem events

Hi there !

Did you try to use unprivileged user or you have used administrator accaunt (domain) ?

Also did you try to use SNMP instead WMI ?

Are both machines on same VLAN ?

HPSIM / IRSA need to be installed on proliant server windows based (win2k3 or win2k8) by recommendation of release notes for IRSS / IRSA.

Kind Regards,

Mladen ...