HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 6.2 Not Collecting Information for HP ProLiant DL380p Gen8

 
TamerGroup
Occasional Visitor

HP SIM 6.2 Not Collecting Information for HP ProLiant DL380p Gen8

Dears ,,,

 

Greetings, we are new to HP servers, we have 8 HP Servers 6 are HP ProLiant DL380p Gen8 (iLO4 Advanced, Firmware 1.40) and 2 HP ProLiant DL980p Gen7 (iLO3 Advanced, Firmware 1.28) all of them are running Oracle Linux 5.10. We have created a virutal machines with Windows Server 2008 R2 and we have installed HP SIM (C.06.02.00.00 and 2010-09-23 13:00). We ran the discovery and all the servers gave the same minor error (Identification cannot get computer system hardware data from the WBEM / WMI providers. and The system did not respond to WS-Management (WS-Man) request. and The Secure Shell key-based access authentication is not configured on the system(s). and System Management Homepage (SMH) is not installed or is not responding on the system(s).). The servers are appearing in the SIM itnerface but with no information from the servers. Is there any configuration or missing requirements are needed in order to collect the required information.

1 REPLY
Yazzi
Advisor

Re: HP SIM 6.2 Not Collecting Information for HP ProLiant DL380p Gen8

6.2 will no doubt not have the MIBs for the Gen8s. Is there any reason you can't upgrade?