Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 7.2 software status unknown

Richard Hrubizna
Occasional Contributor

HP SIM 7.2 software status unknown

Hi all,

 

after upgrading HP SIM to version 7.2 all servers in SIM showing now that software status is unknown. All servers are assigned to latest baseline ( 2013.02.0 ) . I have executed software status pooling task for several times, but it makes no difference.

I can list installed software on server but it seems that this software is not compared agains VCRM.

 

hpsim1.png

hpsim2.png

hpsim3.png

 

How can I resolve this problem ? Thanks.

6 REPLIES
sterls27
Frequent Advisor

Re: HP SIM 7.2 software status unknown

is the VCA configured on the servers and have you run a successful data collection?

Astreseth
Collector

Re: HP SIM 7.2 software status unknown

Hello Richard,

 

I am facing the same issue - have You managed to resolve Yours ?
And to answetr the earlier questoin - yes my HP VC agents are set fine.

I've done upgrades via them so they are working.

 

Thanks,

Bart

Andrew_Haak
Honored Contributor

Re: HP SIM 7.2 software status unknown

Hello there people,

Have you tried the B version of this spp? Could be that this xml is corrupted. Also did you update the VCRM to the latest version included with the SIM installation?

Kind regards,

Andrew
Kind regards,

Andrew
jim goodman
Trusted Contributor

Re: HP SIM 7.2 software status unknown

Keep in mind also how SW Status Poling and data collection has changed since 7x

 

Here is the nuts and bolts of that change...

 

http://worldofinsight.wordpress.com/2012/04/24/hpsim7-setting-baselines-and-software-status/

jim goodman
Trusted Contributor

Re: HP SIM 7.2 software status unknown

I did someone remedied a similar situation by removing the SPP baseline, re-applying the baseline and running SW status polling again.

 

Might be worth a shot - please post back if you tried it and it worked.

Andrew_Haak
Honored Contributor

Re: HP SIM 7.2 software status unknown

Hello again,

Quiet in here, the baseline it self is a questionmark so the problem is with the VCRM. Did you check the VCRM status from the system management homepage of the server running the VCRM(most of the time the sim server)?

You can aways uninstall the VCRM software and reinstall and or readd a new SPP.

Kind regards,

Andrew
Kind regards,

Andrew