HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 7.4 Enclosure fail-over SAS Switch not detected

 
Smithy1975
Occasional Visitor

HP SIM 7.4 Enclosure fail-over SAS Switch not detected

Hello,
first of all: see attachment to understand the situation better.


This interesting phenomenon occured as soon as HP SIM was installed and discovered the enclosure system: 
3Gb SAS Switches.
1. SAS Switch: VSM (active)
2. SAS Switch: VSM (passive)


The passive one doesn't seem to be detected probably because it has no valid IP due to the fail-over configuration, but is there any way to make HP SIM monitor health status of this passive switch too?
Thank you for any help with this issue.