Server Management - Systems Insight Manager

HP SIM 7.4 MIB traps are not displayed

 
Gusty
Occasional Contributor

HP SIM 7.4 MIB traps are not displayed

Hello,

 

After upgrading  7.3 to 7.4 and using SNMP Trap Settings, there are a lot of MIBs for which I can not see the corresponding traps, i.e empty list for if-mib.mib, rfc-1212.mib, rfc-1213.mib, rfc-1215.mib... i.e rfc*.mib and if I want to select cpqhlth.mib or cpqhost.mib it jumps to adaptec.mib. 

Upd100mib.zip -  MIB Update ver. 10 it is bundled in HP SIM 7.4 kit.

I mention that I tried to compile, unregister, register rfc*.mib and to apply once again Upd100mib.zip but no results.

 

Thanks in advance and kind regards.

 

3 REPLIES 3
Andrew_Haak
Honored Contributor

Re: HP SIM 7.4 MIB traps are not displayed

Hello,

 

Did you check the events in SIM for the MIB import ?

Kind regards,

Andrew
Gusty
Occasional Contributor

Re: HP SIM 7.4 MIB traps are not displayed

Hi,

 

If I understand well what you mean, you refer to the Critical, Major, Warning... all events recorded in HP SIM?

Yes, normally. The problem is that I want to disable some annoying event traps, e.g:

 

Health Status Array Change occurred (11020)

Authentication Failure

Link Up

 

 

Andrew_Haak
Honored Contributor

Re: HP SIM 7.4 MIB traps are not displayed

Hello again,

 

I've fixed that problem by updating my agents but i understand what you want to do. When i chekc my SNMP settings i don't see the mib you mentioned but the cpqhost.mib looks fine to me. This is a new 7.4 install and the latest hotfix.

 

Kind regards,

Andrew