Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM 7.5.0 - SNMP v3

wgjhstt247
Occasional Visitor

HP SIM 7.5.0 - SNMP v3

I've configured the Java SNMP v3 stack according to the installation manual for SNMP v3 traps and disabled the Microsoft SNMP Trap service. I'm trying to get HP SIM to correctly discover and authenticate to a Cisco Catalyst switch (IOS) using SNMP v3, SHA/AES128/authpriv. Every auth and priv passcode combination I've tried fails to work with SIM, but works fine with other SNMP managers like SnmpB. If I just configure auth and not priv, the same problem occurs. The only auth and/or priv passcodes that work are passcodes with a single letter repeated 8 times (or more) to fill the HP SIM requirement of 8 characters.

Can this be fixed by HP or do I have to switch to a different SNMP Manager that fully supports SNMP v3?