HPE Community
Server Management - Systems Insight Manager
1753371 Members
5137 Online
108792 Solutions
New Discussion

HP SIM 7 - connect to management processor (iLO)

 
HH-Otti
New Member

‎06-05-2012 04:49 AM

‎06-05-2012 04:49 AM

HP SIM 7 - connect to management processor (iLO)

hi,

I installed my HP SIM 7 and monitor all HP-servers (DL-series) with Windows OS. The iLO's are in a separate network and so I created firewall rules for port 80 and 443. On HP SIM all management processors status FAILED.

What can I do?

Thanks

Otti

0 Kudos
Reply
1 REPLY 1
Snak3eye5
Frequent Advisor

‎06-14-2012 04:40 AM

‎06-14-2012 04:40 AM

Re: HP SIM 7 - connect to management processor (iLO)

If from your sim server you are not able to ping any of the ilo ip's because they are on a separate network, and if you are sure that it isn't something on the host based firewall,  then you need to get with your networking team to see if there are acl's in place that are blocking them. I had the same issue and my networking team had to create an acl rule to open up th sim server ip to all of the ilo ips on a different network.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.