HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM ILO management problems

 
SOLVED
Go to solution
bgm.jonas
Occasional Contributor

HP SIM ILO management problems

Hello,

I have Proliant DL170h G6 servers. These servers have ILO100 remote management modules. I installed HP SIM on my manager-master server. It found all ILO Management processors. SIM will be used for monotoring servers hw and for power on/off servers. But i cant find power off/on function in SIM! maybe i need to do something special on SIM? I want to control power off/on from sim, not from each ilo web access.
3 REPLIES
David Claypool
Honored Contributor

Re: HP SIM ILO management problems

iLO <> LO100. However, look to HP SIM 6.0 (available later this month) for some better feature support for LO100.
bgm.jonas
Occasional Contributor

Re: HP SIM ILO management problems

maybe there are some utility/tools, which let me, with one command, I can power-on all my servers with LO100 controllers?
David Claypool
Honored Contributor
Solution

Re: HP SIM ILO management problems

Check out 'IPMITOOL'