Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM - SNMP Trap Settings - Enable Trap Handling - CLI output

rijsbergen
Frequent Advisor

HP SIM - SNMP Trap Settings - Enable Trap Handling - CLI output

Hello

 

HP SIM V7.2

 

In the 'SNMP Trap Settings' you can check a MIB and what traps are configured.

One of the options is 'Enable Trap Handling' which can be 'Yes' or 'No'.

I was looking for a command to list all the traps and be able to search the output for all 'No' settings to quickly see if a missed trap is because of this setting.

 

Regards,

Marcel

Regards,
Marcel Rijsbergen
3 REPLIES
Andrew_Haak
Honored Contributor

Re: HP SIM - SNMP Trap Settings - Enable Trap Handling - CLI output

Hello Marcel,

I found some info that may help:

Note: The changes made through the SNMP Trap Settings page, are saved to the HP Systems Insight Manager database only. The .CFG and MIB files are not affected.

This info was found in

http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/mxhelp/mxportal/en/useTools_mib_edit.html

So the answer should be in the SQL database file, not sure where to look in the database but it's a start. I saw a table called trapVarbindData, could be something...

Kind regards,

Andrew
Kind regards,

Andrew
Centric
Occasional Advisor

Re: HP SIM - SNMP Trap Settings - Enable Trap Handling - CLI output

Thanx Andrew,

 

thought it would be something like that.

Was hoping for a hidden or undocumented cli.

Will have a look at the databases.

 

Regards, Marcel.

Tushar Bajpai
Trusted Contributor

Re: HP SIM - SNMP Trap Settings - Enable Trap Handling - CLI output

Actually there is no such cli. The data is in DB and in mib folder.
All the file have a tag enable for the same.
if it helped, award me Kudos or Points. Thanks :)

\T Bajpai
HP Employee