HP SIM Teamed NICs report incorrect

[lvinokur]

Hi friends,
We are currently using SIM 5.2 SP2. Couple of weeks ago we bought a new switch and I configured all servers (Proliant DL's) with load balancing (LACP) team, two NICs each. The immediate reaction from the SIM since is that when I run a report on network interfaces of the servers, I get the physical NICs only, no teamed interface present and no useful data.
A sample report is attached.
Will be thankful for any assistance,
Leonid.

[VRC · Accepted solution]

It seams that the system is identified with WBEM support. On HP WBEM Providers, only Physical NIC support is available, use SNMP collection (disable WBEM and do data Collection) to get the teaming data. You need to have SNMP agents on the target machine to get this data.

[lvinokur]

The solution was correct.
I disabled the WBEM in
Options -> Protocol Settings -> Global Protocol Settings
and it worked like a charm.
Funny, I was under the impression that the WBEM provides more capabilities, I guess I was wrong.
Thanks again.