Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP SIM (Windows) and PMP with BL460c... Unsupported Configuration

David Fernandez Vaamond
Occasional Contributor

HP SIM (Windows) and PMP with BL460c... Unsupported Configuration


Hi

I'm using HP SIM 5.1 (windows 2003 SP 1) with PMP 4.1.

I've tried to use one license of PMP (from 5 free licenses) with a BL460c G1 with a Red Hat 4 Update 4 AS x86_64 and PSP 7.70.

When I try to configure PMP, HP SIM show "unsupported configuration" when I select a machine with a deployed licensed in and go to Options -> PMP Options -> Configure.


Does anybody know what is the problem with this configuration? (I've checked support matri x and this configuration is supported...).

Thanks in advance

Regards, David
4 REPLIES
Rob Buxton
Honored Contributor

Re: HP SIM (Windows) and PMP with BL460c... Unsupported Configuration

At a guess the version of PMP is too old to support that hardware.
PMP 4.1 is quite old you may need to get hold of PMP 4.6 which I believe is the latest available for HPSIM 5.1. That version of PMP will support the BL460c I believe.
David Fernandez Vaamond
Occasional Contributor

Re: HP SIM (Windows) and PMP with BL460c... Unsupported Configuration


Thank you Bob. I'm going to try to update this PMP versión and try again.

Regards, David
Christopher Younger
Occasional Advisor

Re: HP SIM (Windows) and PMP with BL460c... Unsupported Configuration

I dunno... I get this even with 4.7 using new BL460c.

I was hoping there was an easy fix for this problem. :)
Carolyn_8
Frequent Advisor

Re: HP SIM (Windows) and PMP with BL460c... Unsupported Configuration

I got this to work with PMP4.7, managed node is RHEL4u6 on bl460c. But still can't get it to work for RHEL5u1 x86_64 on bl460c. Listed as supported in the support matrix so it is supposed to work... Tried changing the system parameters using mxnode -m just to see if PMP would let me configure it but the OS name and version attributes I change don't seem to stay for more than a moment. They are reset shortly after I modify them.