Server Management - Systems Insight Manager
Showing results for 
Search instead for 
Did you mean: 

HP SIM on Checkpoint - SPLAT on DL380

Jeff Verble
Occasional Visitor

HP SIM on Checkpoint - SPLAT on DL380

We are attempting to get SIM working on a checkpoint firewall running SPLAT.
I have found some articles that imply this should work.

I am looking to see if any others have been successful with this setup, or may have an alt setup.

Currently using files:
08/10/2010 12:00 AM 551,202 cmanic-7.7.0-5.rhel3.linux.rpm
08/10/2010 12:00 AM 4,906,541 hpasm-7.8.0-97.rhel3.i386.rpm
08/10/2010 12:00 AM 6,061,007 hpsmh-2.1.8-177.linux.i386.rpm
08/10/2010 12:00 AM 91,852 splat_hpasm_support_files.tgz
Instruction to configure from:

I have not been able to find any newer information.
Any assistance is appreciated.




P.S.This thread has been moved from  Insight Remote Support>general to ITRC HP Systems Insight Manager Forum- HP Forums Moderator

Victor Franklin
Occasional Contributor

Re: HP SIM on Checkpoint - SPLAT on DL380

Hello Jeff I was wondering if you have gotten any additional information on your question?
Jeff Verble
Occasional Visitor

Re: HP SIM on Checkpoint - SPLAT on DL380

What we are trying to accomplish is to monitor the raid controllers via snmp which the OS or Checkpoint cannot see in a RAID environment, and also would like to be able to gather information on the ILO's for HP support information.
The second part is an error during the install.

Syntax error on line 52 of /opt/hp/hpsmh/conf/smhpd.conf:
Error:\tApache has not been designed to serve pages while\n\trunning as root. There are known race conditions that\n\twill allow any local user to read any file on the system.\n\tIf you still desire to serve pages as root then\n\tadd -DBIG_SECURITY_HOLE to the CFLAGS env variable\n\tand then rebuild the server.\n\tIt is strongly suggested that you instead modify the User\n\tdirective in your httpd.conf file to list a non-root\n\tuser.\n
error: %post(hpsmh-2.1.8-177) scriptlet failed, exit status 1
[Expert@usalpfwext03]# exit
[usalpfwext03]# e