Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-SIM result of configure disk threshold

SOLVED
Go to solution
Azaru
Regular Advisor

HP-SIM result of configure disk threshold

Hi i have configured HP-SIM in one of my unix server.I have configured the disk threshold through configure disk threshold wizard.when i run the configuration it shows setting was set to the device successfully.My question is where can i view the results ?It exceeds the disk threshold like that only i have set i dont know where to see the results if the disk exceeds the thresold i want to get the result in HP-SIM where can i see that ?Any scrap in this welcome
2 REPLIES
Rob Buxton
Honored Contributor
Solution

Re: HP-SIM result of configure disk threshold

An SNMP Trap is triggered when the threshold is crossed.
You should be able to see the setting from the SMH, browse to the server (https://servername:2381) and look under Operating Systems you should see File Space Used. That will have the threshold sliders set.
Azaru
Regular Advisor

Re: HP-SIM result of configure disk threshold

Dear Rob,

Its working fine now.

Thanks
azaru