HP SMH doesn't show Storage items

[shocko]

True, I assuming this has been checked but I guess you should never assume! :)

[SwisspostIT]

hm I've just seen two things in the screenshot :

1) the SNMP Service is probably correctly configured since you get some of the information

2) under "management processor" there is the value "none". Is it possible that you don't have configured ilo correctly for HP SIM?

[beegos]

I am sure that SNMP is correctly configured. As you say, I get all informations except the Storage.

About value "none" for MP, I fixed it but it doesn't change anything in my case. I manage about 20 servers with HP SIM, most of them are running under 2K3 and 2K8, last three installations are 2K12 and on two of them I have the Storage problem.

[shocko]

Can you try an snmpwalk aganist the system? See whats missing? Also, you have no other software using port 161 on that server?

[beegos]

OK, I found a solution. It is necessary to install additional driver:

HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2012

[shocko]

Hmm, and this wasn't installed with the PSP like the other machine that was working?