HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Server Management - Systems Insight Manager
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Sim Agents for Linux/ESX

 
Andrew_28
Occasional Advisor

HP Sim Agents for Linux/ESX

Is there a way to exclude certain nic cards and unmanage them from the HP SIM agents?

Thanks in advance.
3 REPLIES
David Claypool
Honored Contributor

Re: HP Sim Agents for Linux/ESX

Can you be more specific?
Martin Graetz
Occasional Contributor

Re: HP Sim Agents for Linux/ESX

Hi.
Maybe I have the same problem:

We have ESX Servers with 2 or 3 dualport NICs.
Not all NIC Ports are already connected to the network. So they show up als "link failure" and system status "major" in SIM.

I would like to disable the monitoring of these unused ports (in Windows this can be done by disabling the connection.

Thanks,
Martin.
Andrew_28
Occasional Advisor

Re: HP Sim Agents for Linux/ESX

I figured it out thanks by putting a loopback in the nic cards I don't need to prevent any link down alerts.